Kexcelled ABS K5 (ABS+) 1kg/1.75mm Review – Strong, Low-Warp Filament for Functional Prints (Malaysia)
Kexcelled ABS K5 (ABS+) 1kg/1.75mm Review – Strong, Low-Warp Filament for Functional Prints (Malaysia)
Updated for Malaysia | Price range: RM58 – RM65
If you need a tough, tahan lasak ABS filament that’s easier to print than standard ABS, the Kexcelled ABS K5 (ABS+) is a solid pick. At RM58–RM65, memang value for money for functional parts, jigs, brackets, and any print that must tahan panas and impact.
Why Kexcelled ABS K5 Stands Out
- Low Warping, Better Dimensional Stability – ABS+ formulation helps reduce warping and corner lift, so prints stay kemas.
- Strong Layer Adhesion – Layers fuse nicely, producing tougher parts for daily use.
- Smooth Surface Finish – Out of the printer pun dah smooth; senang nak sand, acetone-vapor (optional), or cat.
- Consistent Diameter – More stable extrusion reduces under/over-extrusion artifacts.
Specs & Recommended Settings
| Material | ABS+ (Kexcelled K5 series) |
| Diameter / Weight | 1.75mm / 1kg spool |
| Nozzle Temp | 230–250°C (start 240°C and adjust) |
| Bed Temp | 90–110°C (try 100°C as baseline) |
| Chamber/Enclosure | Recommended to reduce layer cracking (lagi stable) |
| Cooling | 0–20% (minimal) to maintain interlayer strength) |
Printing Tips (Supaya Senang Dapat Hasil Cun)
- Use an enclosure if possible—consistent ambient heat elak layer splits.
- First layer is king: clean bed with IPA, use PEI, glue stick, or ABS slurry for extra grip.
- Slow the outer walls (e.g., 35–45 mm/s) for nicer surface and dimensional accuracy.
- Ventilation: ABS ada fumes; make sure bilik ada airflow or use external ventilation.
Pros & Cons
- ✅ Durable & heat-resistant for real-world parts
- ✅ Reduced warping vs normal ABS, easier on desktop printers
- ✅ Smooth finish and easy post-processing
- ❌ Needs enclosure/ventilation for best results
- ❌ Not as odor-free as PLA/PETG (biasa for ABS)
Verdict (Ringkas & Jujur)
If you’re serious about functional prints that look professional & tahan lasak, Kexcelled ABS K5 is an easy recommendation. It delivers the strength of ABS with less hassle—memang sesuai untuk makers in Malaysia.
FAQ (Soalan Lazim)
Do I need an enclosure to print ABS+?
Highly recommended. ABS+ is more forgiving than pure ABS, but an enclosure stabilizes temperature and reduces warping/cracking.
Is the filament smelly?
ABS releases noticeable fumes; ensure proper ventilation. Kalau boleh, print in a well-ventilated space.
What’s the best bed surface?
PEI sheet, glass with glue stick, or ABS slurry all work well. The goal is strong first-layer adhesion.
